A "Swing" Card

This little framed card has accordion folds so it can be flattened to mail and then popped open to display a swinging design element! 

These are some additional photos and a short video showing the card swinging that you can reference throughout the detailed instructions provided below.



Side view of incremental folds.





Inside back panel.



Extensions on hammock to wrap thread to create the swinging embellishment.



Side view of completed embellishments.

Instructions:

• Cut a 3 ¾ x 8-inch piece of white cardstock, position horizontally and score vertical lines at 3 ½, 3 ¾, 4, 7 ½, 7 ¾ and 8.
• Rotate the scored piece to the vertical position.  Center and stamp Posy Petals on the first segment of the cardstock with black ink and heat emboss with clear powder.  (In this sample the ladybug was not inked.)
• Create a window by cutting out the area between the two flowers.  Note:  Be sure to leave enough at the top and bottom to join the two sides and also hide the accordion folds when assembled.
• Add Tumbled Glass and Faded Jeans Distress inks around the flowers.
• Fold on score lines to create an accordion card.  Note:  The last flap at the top will be the gluing tab, but leave it unsecured at this time so additional artwork can easily be added to the inside of the card.
• Ink a 3 ¼ x 3 ¾-inch piece of white cardstock with Tumbled Glass and Faded Jeans Distress ink.  Stamp Zen with Faded Jeans ink over the distress inks.  Accent the stamped pattern with a white gel pen.  Adhere the cardstock to the inside back panel with adhesive.
• Stamp Posy Petals multiple times on white cardstock with black ink and heat emboss with clear powder.  Color and trim individual elements to create layers for the flowers, leaves and to build the little girl in the hammock.  In this sample, three layers were combined to create a dimensional element.  Save one ladybug for an embellishment.
• When trimming the layers for the swinging hammock, be sure to leave an extended portion of cardstock on either side of the image.  This will provide an area to wrap thread around to hang the embellishment and allow it to swing.  Coat the thread wrappings with Glossy Accents.
• Align the hammock in the window so the ends match up with the bows.  Secure the threads at the top of the card and trim the ends.
• While the card is still “open”, stamp Thinking Around on white cardstock with black ink and heat emboss with clear powder.  Trim with either a circle punch or a circle Spellbinder’s die.  Distress the edges with Tumbled Glass Distress ink.  Attach to the inside of the card with dimensional foam.
• Stamp grass on white cardstock with black ink and heat emboss with clear powder.  Color and trim to fit across the bottom of the card.   Attach with dimensional foam.
• Glue the card closed.
• Accent the card with the prepared flowers, leaves and ladybug.
• Now all that is left to do is wiggle the card and see the hammock swing!

Video (without sound) showing the swinging hammock.

If you enjoy creating cards with frames and/or borders, be sure to visit the Penny Black Blog to participate in this week's reader challenge.  

Thank you so much for your visits and lovely comments.  They are greatly appreciated and enjoyed immensely!

Happy Friday,

Elizabeth

Supplies:

Penny Black Stamps:  Posy Petals 4151K, Zen 40-051, Sweet Home 40-054, Thinking Around 3650F

Tsukineko: Onyx Black VersaFine, Jumbo Sponge Daubers

Ranger: Tumbled Glass Distress Ink, Faded Jeans Distress Ink, Glossy Accents, Super Fine Detail Clear Embossing Powder

Copic Makers

Tombow: Stamp Runner Permanent Adhesive

3M Scotch: Dimensional Foam Tape
Spellbinders: Circle Nestability

Graduation Cards

Congrats for the graduate…..



Finished Size:  3 1/4 x 4 3/4

Penny Black has wonderful alphabet and number sets.  Everything from small script to bold block letters.  This transparent number set appropriately titled “Who’s Counting?” contains doodled numbers that are 1 ½ inches tall making them fun to color and a snap to trim.

Big polka dots stamped in two colors and crystal Stickles add to the festivity.  The cap is from A Scholar. 

Published in Crafts ‘n Things June 2010. 

This is another graduation card that I made for last year which was published in Crafts ‘n Things June 2010.

It has a pocket on the inside to tuck a little something for the grad.

Published in CardMaker. 

Instructions and materials list for this card are available in the May 2011 issue or can be downloaded in a digital version from  www.cardmakermagazine.com

You can see another one of my graduation cards in the current issue (May 2011) of CardMaker on page 76.

If you are interested in other published works, please feel free to click on the Artist Highlights tab at the top of the blog to view a listing of magazines featuring my art.

To all the graduates of 2011 – Congratulations!

Elizabeth

Supplies:

2011 Congratulations

Penny Black Stamps: Design Spotter 40-050, Who’s Counting? 30-004, A Scholar 40-018, Congratulations 3934H

Penny Black “Mix & Match” Cardstock:  Sea Breeze 08-003

Canson: Watercolor Paper

Tsukineko: Onyx Black VersaFine, Wheat VersaMagic, Aquatic Splash VersaMagic

Tombow: Dual Brush Pens, Stamp Runner Permanent Adhesive

Ranger: Crystal Stickles

3M Scotch: Dimensional Foam 

2010 Congratulations:
Penny Black Stamps: Graduates 3933K, Congratulations 3934H, Congrats 3850E, Kate Brushstroke Uppercase Alphabet 20-001

Celebrate Your Day:
Penny Black Stamps: A Scholar 40-018, Congrats 3850E (inside on pocket)

Tagged With Love

A friend recently asked me about my creative process and how I approach creating my artwork.  After some thought, I realized that I don’t have a “set” approach and it can vary from wanting to use a specific color, design or shape to building it around a sentiment or phrase.

This little tag/card is the perfect example of that “no-approach” approach.

From the moment I saw this little dog as a part of Every Pet’s Dream I knew that I wanted to use him in such a way that he would be the focal point.  From there, everything else just fell into place.

The tag/card was scaled down to compliment the size of the stamped image.  With images from the Airmail set, I added the “to” salutation and used the bar code to make a semi-enclosed dimensional platform. 

These are the “behind the scene” images used to create the elevated artwork that disguise the dimensional foam.

The “pegs” on the bottom of the dog’s feet allow the image to be attached to the platform and serve as a base for the final artwork.  You could use just the one image, but I like the added thickness of the two stacked on top of each other.

The base of the card is built by cutting two pieces of white cardstock that measure 2 ¼ x 3 ½.  The back piece is scored  ¾-inch from the top.  When the two pieces of cardstock are being adhered together a small jewelry tag is inserted into the seam.  The twine is from a shipping tag that was colored with a Copic marker.

Those little “o’s” in the words love were the perfect size to place a crystal gemstone!

I hope all of you are tagged with love today.

I will be back on Tuesday with some graduation cards.

Have a wonderful Memorial Day weekend,

Elizabeth

Supplies:

Penny Black Stamps:  Every Pet’s Dream 4166K, Airmail 30-072

Penny Black “Mix & Match” Cardstock:  Olive Grove 04-001

Tsukineko: Onyx Black VersaFine

Ranger: Peeled Paint Distress Ink, Tumbled Glass Distress Ink, Super Fine Detail Clear Embossing Powder, Crystal Stickles (bow), Glossy Accents (adhesive for small areas)

Copic Markers

3M Scotch:  Dimensional Foam Tape

Mark Richards: Crystal Gemstones    

Avery: Jewelry Tag

A Gentle Breeze

Along with a combination of new stamp images from Penny Black’s “Touch of Whimsy” catalog, today’s card demonstrates how to create your own paper-pieced elements.

The first example of paper piecing is the balloon.  When you view the links for the stamps listed below, you'll notice that a only a small portion of the kite string was inked giving me the opportunity to substitute a balloon for the kite.

 

Traditionally paper piecing is done by stamping the image multiple times on different papers to piece the main image with solid cardstock or patterned papers.  Here I used a variation of that concept.  The paper-piecing elements were created by stamping the image on watercolor paper.  The elements were then water colored and layered without dimensional foam.


These are the detailed instructions for today's card:

• Create a 3 ¼ x 5 1/8-inch top fold card from white cardstock.
• Stamp Paisley Outline with Toffee ink on a 3 ¼ x 5 1/8-inch piece of olive cardstock.  Ink the edges with Vintage Photo Distress Ink.  Adhere to the front of the prepared card.
• Stamp the sentiment at the top of a 2 ¾ x 4 5/8-inch piece of white cardstock in black ink and heat emboss with clear powder.
• Ink the bear and a small portion of the kite string with black ink and stamp under the sentiment.  Heat emboss with clear powder.
• Add highlighting around the bear and color the grass with Copic markers.  Mat with a 2 7/8 x 4 ¾-inch piece of dark blue cardstock.  Attach to the front the prepared card with dimensional foam.
• Stamp the bear three times on watercolor paper with black ink and heat emboss with clear powder.
• On the first image, color the bear’s head, arms and shoes using water coloring techniques.  Trim the full image and set aside.
• On the second image, color the shirt.  When trimming, cut out the shirt along with the connected portion of the overalls.  Set aside.
• On the third image, color the overalls.  Trim the overalls.
• To assemble the layers with adhesive, start with the full image and place the shirt with the overalls on top.  Place the third layer (the overalls) on top.
• Using the stamped image on the front of the card for alignment, glue the paper-pieced accent into place.
• Stamp the balloon from “Scooting Along” on watercolor paper, color and trim.  Attach to the card with adhesive.
• Use a fine-tipped black pen to add additional string to connect the balloon to the bear.

Thank you for your visits.

Have a beautiful day,
Elizabeth

Supplies:

Penny Black Stamps:  Fly With Me 4142K, The Wind 4178H, Scooting Along 4128J, Paisley Outline 40-048

Penny Black “Mix & Match” Cardstock: Sticks & Stones 01-001, Olive Grove 04-001, Clear Skies 10-003

Canson: 140 lb. Watercolor Paper

Tsukineko: Onyx Black VersaFine, Toffee VersaFine

Tombow: Dual Brush Pens, Stamp Runner Permanent Adhesive

Ranger: Vintage Photo Distress Ink, Super Fine Detail Embossing Powder

Copic Markers: B0000, B000, B00, YG03, YG05, YG07 (sky and grass backgrounds)

3M Scotch:  Dimensional Foam Tape

Thinking of You (Four in a Flash)

This was a group of cards that I made using the new Touch of Whimsy transparent set from Penny Black.  I love clean and simple cards and these were fast and fun to create.

For added interest, I let the stem of the flower extend below the tabbed sentiment.

The stem for this tiny flower was created by stamping another flower in the set on white cardstock, heat embossing it in white and adding distress inks.  I like the contrast of this itty bitty flower on the card.  

The umbrella in the set was the perfect size to give this bunny a fun hat.

These fun images were trimmed and colored for another quick card.  

I kept the "recipe" the same for all the cards and had fun adding "touches of whimsy".

• The card bases are 3 3/8 x 4 1/2 top-folded white cards.
• The sentiment strips are 7/8 x 2 3/4-inch pieces of Forest Glen cardstock that were inked with Shabby Shutters Distress and Peeled Paint Distress. 
• The sentiment is from Salutations.

Clean, simple and fun!!

Thank you for viewing,

Elizabeth

Supplies:

Penny Black Stamps:  Touch of Whimsy 30-073, Salutations 30-014

Penny Black "Mix & Match" Cardstock:  Storm 01-001, Forest Glen 07-001
Tsukineko: Onyx Black VersaFine
Ranger: Shabby Shutters Distress Ink, Peeled Paint Distress Ink, Crystal Stickles, Detail Fine Clear Embossing Powder
Copic Markers

Romance of Flowers

On Monday, I featured a decorated envelope using Penny Black’s new transparent set called “Air Mail”.  Today I am combining the same set with their “Romance of Flowers” stickers.

The scalloped border stamp created the perfect frame for this gorgeous sticker.

The “do not bend” stamp was used to create this tiny tag which I then inserted the sentiment “with love” from the same set.

These are the instructions for this card which include details on how the frame and tag were created and a quick method of transforming stickers into dimensional embellishments with cornstarch.

Instructions:

• Create a 3 7/8 x 4 7/8 top fold card from dark Clear Skies cardstock.  Set aside.
• Lightly add Vintage Photo ink to a 3 ½ x 4 ½ piece of cream cardstock and ink the edges with gold ink.
• Mat with a 3 5/8 x 4 5/8 piece of light Fall Festival cardstock.  Paper pierce a border around the perimeter of the cream cardstock.
• Attach to the front of the prepared card.
• Wrap a sheer organza ribbon around the bottom of the card and tie in a knot on the front left side.
• Stamp frame in VersaMark Watermark ink on light Purple Mountain cardstock and heat emboss with white powder.
• Randomly add Pine Needles and Dusty Concord around the frame for a variegated effect. Trim the frame.
• Glue the frame to the sticker which has been placed on white cardstock.
• Attach to the front of the card with dimensional foam tape.
• Inking only the frame portion of the “do not bend” image, stamp on white cardstock in black and heat emboss with clear powder.  Stamp “with love” inside the tag in black and heat emboss with clear powder.  Add distress inks, trim and attach with dimensional foam.
• Remove the butterfly sticker and lightly dust the sticky side with cornstarch.  (You can also use baby powder.)  Slightly add bends to the wings.  Attach to the card with a small amount of glue. 
• Accent the centers of the flowers with Gun Metal Stickles and the scallops of the frame with a Sparkle Gel Pen.

Don't miss visiting the Penny Black Blog for more cards featuring Penny Black stickers created by the design team.  Lots of beautiful inspiration!

I also have two previous posts that use Penny Black stickers here and here.

Thank you for stopping by.

Elizabeth

Supplies:

Penny Black Stamps:  Air Mail 30-072

Penny Black Stickeroos:  Romance of Flowers 10-209

Penny Black “Mix & Match” Cardstock:  Sticks & Stones 02-001, Clear Skies 10-003, Purple Mountain 12-001, Fall Festival 16-001

Tsukineko: VersaMark Watermark Ink, Onyx Black VersaFine, Gold Metallic StazOn

Ranger: Pine Needles Distress Ink, Dusty Concord Distress Ink, Vintage Photo Distress Ink, Gun Metal Stickles

Sakura: Sparkle Gelly Roll Pen

3M Scotch: Dimensional Foam Tape

Tombow:  Stamp Runner Permanent Adhesive

White Embossing Powder

Clear Embossing Powder

Sheer Organza Ribbon

Decorated Stationery Box & Note Cards

For the next three days Penny Black has partnered with Tombow USA for a special blog feature.  

Each day a different artist will reveal their creative inspiration.  Today I am sharing a stationery box with note cards.

Instructions:

Trace the template provide here on watercolor cardstock and cut.  For this sample I used 140 lb. Canson Watercolor Paper.  Apply color directly from the markers (098, 665, 856) to Reverie, mist inked stamp with water, and stamp.   Continue with this process to cover the entire piece.

There is one section of the pattern that will need to be stamped on the reverse side to provide a finished look to the inside edge of the box.  That piece is the long tab that will be folded into the back edge.

Over stamp the design with the Letter Background in gold ink.

Score the fold lines and assemble the box.  Be sure to insert a ribbon, if desired, under the last fold of the box flap before applying adhesive.  This will hide the ribbon and provide an open surface to attach the Tombow Fastener Tab.

After the Fastener Tab has been attached to the top flap, remove the adhesive backing from the remaining portion and then close the lid shut.  This will provide the proper placement of the second piece without adhering the two sections separately.

• To create the note cards, cut 2 ¾ x 3 ¾-inch pieces of Storm (01-001) cardstock and stamp a shadow block with Tombow Dual Brush Marker 090.  Instructions for creating a custom shadow stamp can be viewed here.
• Mask off the area around the shadow with Judi Kins Eclipse Tape.  Ink Reverie with the markers (098, 665, 856) and “huff” on the ink.  Stamp over the exposed shadow image.
• Remove the Eclipse Tape.
• Stamp the sentiment with black pigment ink and heat emboss with clear powder.
• Mat the cards with 3 x 4-inch pieces of Penny Black Mix & Match cardstock that have been edged in gold. 

Finished Box Size: 3 3/8 x 4 ¼ x 1

Finished Note Cards: 3 x 4

Thank you for viewing.

Elizabeth

Featured Products: 

Penny Black Stamps: Reverie 4180J, Letter Background 1999L, Tiny Wishes 30-026

Penny Black Mix & Match Cardstock:  Storm 01-001, Fuchsia Fantasies 13-002, Fall Festival 16-003

Tombow Dual Brush Pens: 090, 098, 665, 856

Tombow Stamp Runner Permanent Adhesive

Tombow Fastener Tabs